Rigel-systems Infralite User Manual
Browse online or download User Manual for Optical devices Rigel-systems Infralite. Rigel Systems Infralite User Manual
- Page / 2
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Infralite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Infrared LEDs light dimly. This is
normal as white LEDs require higher
voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop
over thumb knob.
1
2
Summary of Contents
Related products and manuals for Optical devices Rigel-systems Infralite
(2 pages)© 2020, manymanuals.com. All rights reserved. | 1.184 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals